Scott DIY
Region: GB
Friday 10 January 2025 09:10:22 GMT
126945
1785
246
81
Music
Download
Comments
fedex1820🇵🇸 :
if you fix it in to the wall in this config you're going to shake your actual house.... washing machine on the floor my dude
2025-01-10 14:44:26
17
Shrew :
Lots of wall fixings, more than you think you need. Also sit the machine on top of some gym matting to absorb some of the vibration and prevent movement.
2025-01-10 12:31:32
23
Nick Coram :
To help with vibration set it on a heavy mass to damp low frequency high amplitude vibration and a rubber mat for high frequency low amplitude vibrations. Heavy duty paving slabs.
2025-01-10 14:23:27
11
Chris Abrams | 5-9 painter 😴 :
First vid I have seen and it's a breath of fresh air hearing such honesty. I will be soon undertaking a built in wardrobe DIY. Will be following along in future!
2025-01-10 11:35:11
33
rbusinessa :
I would change your configuration around. I know it looks and works better to have the washing machine hip height, but I’d put it on the floor on a rubber mat. Then hip height can be your shelf and pull out, top shelf storage. Any leaks from the washing machine would cascade down and rot all your timber as well if put in the middle.
2025-01-10 10:36:56
49
Colin Long :
might be easier to just buy a flat pack tall boy unit and modify it to your needs
2025-01-11 20:08:13
0
Tyler Walker :
From someone who works in hospitality and not construction, the vibrating problem could come from overloading the machine when washing. An overloaded machine offsets the equilibrium of the drum when
2025-01-11 10:16:14
2
Daaron :
Look at the inspro vid it’s a 600 unit above and below then has end panels on flush with the doors this gives an in frame look but will make the space for the washer 600 wide. The shelf below the
2025-01-10 20:46:25
1
Robert Hurst :
Why don’t you just have the washing machine on the floor and storage above?
2025-01-11 00:09:43
0
Christopher Lovat707 :
Sit the washing machine on rubber anti vibration pads.
2025-01-13 07:48:04
1
Scott DIY :
Always keeping it real 🙏🏻 that’s a promise
2025-01-10 09:14:14
10
Jasmine | DIY Home Renovations :
It does make you wonder how the mdf stacked machine units cope with the vibration though? I’m not sure I’ve not seen anyone make this consideration, does it NEED to be fixed to the wall?
2025-01-11 07:53:56
3
user1386904578215 :
that's shocking 😂😂
2025-01-11 17:03:25
4
Tom :
150mm concrete screws boshh
2025-01-10 09:34:05
7
joeye856 :
hammer fixings or anchor fixing , concrete screws
2025-01-10 16:43:38
3
Cardboard Tv :
if u can build a solid base out of block. just the bottom bit , concrete flag on top then timber and clad top end..solid base for washers is the only way
2025-02-11 18:12:37
1
A C R O O K E D P A T H :
Rubber matting under washing machine?
2025-01-10 10:22:34
3
Darren Boys :
Cls is fine
2025-01-11 18:06:11
1
S B :
Slotted L brackets at the top will help with movement instead of fixed screws. Nowhere near strong enough on the bottom though.
2025-01-10 09:44:31
3
Mike jones :
Just go to ikea & buy a modular system
2025-01-10 09:50:57
0
Prfkblac :
polystyrene will absorb some of the shaking I'd put some between the frame and the wall and sit the washer on it (chocks)as well , as long as there is sufficient air flow
2025-01-11 19:08:34
1
Simon :
is the machine direct drive or belt, all the ones i’ve seen on shelf are direct and much less vibration
2025-01-10 20:36:55
1
Shotla :
Is it legal to have the waste pipe right next to the mains sockets?
2025-01-10 16:27:24
4
Mr Awesome :
could be dangerous, washing machine falls out. Cracking of walls, failure of fixings. I would put it on the floor.
2025-01-10 11:46:54
2
Josh0485858 :
Anti vibration foot mounting for the washing machine.
2025-01-10 10:14:40
2
To see more videos from user @scott_diy, please go to the Tikwm
homepage.
