@the11stkiss: Dua Puluh Empat Pedang

The 11th Kiss

Open In TikTok:

Region: ID

Friday 15 May 2026 03:48:14 GMT

1268882

18302

57

175

Music

Download

No Watermark .mp4 (11.08MB) No Watermark(HD) .mp4 (11.08MB) Watermark .mp4 (12.41MB) Music .mp3

Comments

YanZn :

bro dengan santai nya 🗿

2026-05-15 17:07:28

30

wong madu :

2026-08-16 13:01:17

0

Di ujung senja🌥️ :

seri keduanya ada di freereels lebih seru

2026-06-07 03:22:38

3

Sesat Timur john :

waduh the mask of Zorro😂😂😂😂

2026-06-02 17:43:40

2

DEXBOND :

ooh disini ternyata sudah lama aku mencarimu bro😁

2026-06-05 09:01:29

4

BADAY otw my love🇮🇱🇮🇱🇮🇱 :

2026-06-03 22:33:58

0

jodohku :

jadi zoro

2026-08-08 15:47:25

0

Posta Prsta :

🥰

2026-05-18 05:50:44

1

Mohamad Fadli :

Terima kasih 🙏

2026-05-24 04:31:56

0

teo :

ada GK lanjutan flm ini LG..

2026-06-08 14:32:05

2

DHAMAR MURUP :

di sana bambu tumbuhnya sendiri",sedangkan di indo bambu berkelompok

2026-05-21 17:22:26

5

😇aditiya :

kapan tamatnya

2026-05-31 16:14:24

1

Jumatul Ikhwan :

pedang jingze pertama yang patah tidak sama bentuk denga yang kedua....

2026-05-28 14:35:04

1

omakeny :

next

2026-05-19 08:17:14

1

HABIBIE SHOP26 :

sial... jian ersishi berubah jadi Zoro 😏

2026-07-09 13:36:41

0

Kusnadi :

lele muternya

2026-06-13 12:44:16

0

arkan :

😁😁😁

2026-07-05 08:23:40

0

Irfan :

🥰🥰🥰

2026-06-22 14:19:40

0

cing heri :

🥰🥰🥰

2026-06-24 07:44:29

0

Mas Mora99 :

😍😍😍

2026-06-24 21:44:43

0

p :

🥰🥰🥰

2026-07-01 04:23:18

0

endahpriyatin6 :

😳😳😳

2026-07-12 09:58:37

0

BANG CULIK 01 :

🥰🥰🥰

2026-05-15 20:47:33

0

To see more videos from user @the11stkiss, please go to the Tikwm homepage.

Other Videos

Corn C16 pro max received with no display graphics only dim light, indicating a problem on the graphics section. owner argued that it was caused due to sweat. in the graphics section, values seemed to be normal but the CFLY1 side of the fly capacitor in the graphics section had low ohm resistance reading, I held the hot testing method, only the VSP- line had a steady voltage of -5.4v and the VSP+ had +0.5v which is abnormal, then i decided to change the graphics ic, know what, readings became normal again, all the VSP- and VSP+ voltages were generated but still there was no graphics. All diode readings on the mipi lines on the filter resistors were okay too. then I decided to open the screen itself since it was caused by sweat, I suspected some few components on the screen flex to have faults. this is where I found a diode and cap connected to the VSP+ line short circuited to ground. I removed these two but still there was a short. I concluded that the line had been shorted in the flex itself. I then cut apart the line that connects to the connector on the board and cut the line on the flex and made a jumper as shown in the video. Real time troubleshooting is needed otherwise, another tech would recommend that the phone requires another screen.. Reach out to us on TEL: +256708201320 MAKANIKA-DT @ASHABA PHONE SERVICES ✅️ @deepfix academy @Ali phone service center Mukon @ewa MUKO PHONE SPARE HUB & SER @mediaphone.service @GRANDMA MOBILE TECH LIMITED @HEZO PHONE SERVICES @amorim.cell @🅶🅰🅻🅻🅴 🆂🅾🅻🆄🆃🅸🅾🅽📲 @Makanika Kifule #makanikadt #repair #phone #viral #engineering

Corn C16 pro max received with no display graphics only dim light, indicating a problem on the graphics section. owner argued that it was caused due to sweat. in the graphics section, values seemed to be normal but the CFLY1 side of the fly capacitor in the graphics section had low ohm resistance reading, I held the hot testing method, only the VSP- line had a steady voltage of -5.4v and the VSP+ had +0.5v which is abnormal, then i decided to change the graphics ic, know what, readings became normal again, all the VSP- and VSP+ voltages were generated but still there was no graphics. All diode readings on the mipi lines on the filter resistors were okay too. then I decided to open the screen itself since it was caused by sweat, I suspected some few components on the screen flex to have faults. this is where I found a diode and cap connected to the VSP+ line short circuited to ground. I removed these two but still there was a short. I concluded that the line had been shorted in the flex itself. I then cut apart the line that connects to the connector on the board and cut the line on the flex and made a jumper as shown in the video. Real time troubleshooting is needed otherwise, another tech would recommend that the phone requires another screen.. Reach out to us on TEL: +256708201320 MAKANIKA-DT @ASHABA PHONE SERVICES ✅️ @deepfix academy @Ali phone service center Mukon @ewa MUKO PHONE SPARE HUB & SER @mediaphone.service @GRANDMA MOBILE TECH LIMITED @HEZO PHONE SERVICES @amorim.cell @🅶🅰🅻🅻🅴 🆂🅾🅻🆄🆃🅸🅾🅽📲 @Makanika Kifule #makanikadt #repair #phone #viral #engineering

#cops #police #bodycam

#cops #police #bodycam

The most perfect fall bag 🖤#chanel22#fyp

The most perfect fall bag 🖤#chanel22#fyp

#الشعب_الصيني_ماله_حل😂😂 #زوجي #fyp #fyp #goviral

#الشعب_الصيني_ماله_حل😂😂 #زوجي #fyp #fyp #goviral

#loyaltty #martinwhite

#loyaltty #martinwhite

About

Robot
API

Legal

Privacy Policy