PokePaletteBinders
Region: US
Friday 29 May 2026 02:54:41 GMT
3144
47
19
1
Music
Download
Comments
Isa🌱 :
So this happened to one of my binders, I’m not 100% sure what the exact reason was, but I repainted the binder and have had 0 issue now. I use gesso as a base layer, i think it helps the paint stick better, and spray about 3 thin layers of the matte mod podge acrylic spray, and I wait about 15 minutes between each layer for it for dry before spraying again. I also have done a binder where some parts I didnt add the gesso base layer and it was fine, i think because it was only one or two layers. I did notice that the parts that were flaking the most on the previous binder were the areas that took a lot of layers, like yellow and white. I’m not super sure
2026-05-29 13:51:27
3
Cakes :
use a spray clear coat instead of
2026-05-29 03:44:14
2
PokePaletteBinders :
thank you all for your advice! I ended up touching this one up and resealing it with spray modge podge and then a layer of regular modge podge. foe other binders, i tested spraying with a couple layers of spray sealer and then a layer of regular modge podge. seems to have fixed the problem!
2026-05-30 19:34:04
1
The1uan :
It’s a good idea to do multiple coats of sealant and give it at least 12 hrs to fully dry
2026-06-18 13:13:48
0
sleepyeevee222 :
When i gesso i add a bit of water and do a couple of light coats
2026-06-14 09:05:33
0
Yes :
If you’re using paint pens, that could be why. I notice I have the same issues when trying to mod podge anything I’ve used paint pens for. I think they’re water based??????? I’m not sure tbh, but they tend to lift a lot when rubbed on
2026-05-29 04:31:08
0
FeldsparGaming 🏳️⚧️ :
Is it possible that those areas had a bit of oil from your hand or a bit of dust on them? Like more on those areas than others which causes the paint not wanting to stick to the surface and when you brush on modpodge it lifts the paint from those spots?
2026-05-29 16:34:11
1
Pokemaster89 :
You might have pressed to hard during the painting process mine did the same thing I had to end up cleaning it up and just waiting to do it to a different binder this is the aftermath after,it peeled the first layer I painted to hard and it lifted the material there, you can see the material that lifted and left lighter area
2026-05-29 07:42:23
0
creating_sarahtonin :
I use acrylic sealant the spray kind that works way better for me because mine is the same thing with modgepodge
2026-05-29 19:38:32
0
Jack Blossom :
I’ve noticed some white and light color paint pens are almost “chalky” in consistency and tend to flake more than other colors. It might be a quality issue, like cheaper brands adding chalk or something to make it more opaque because I don’t have this problem with my Sharpie or Poscas, but I do have it with my off-name brands
2026-05-30 07:24:37
0
artby.eevee :
I wouldn’t use modpodge it might be smearing it. Or if there’s an alcoholic ingredient it might be making it flake
2026-05-29 12:54:39
1
thepastelpoke :
you have to seal the base firsttt not just after
2026-05-30 00:36:51
0
Vivi | custom binder artist :
Someone told me that gesso doesnt stick well to the Vaultx texture. Have your others had the same issue?
2026-05-31 11:08:34
0
April Salinas :
the acrylic paint is waterbased so will pick up the extras and spread it ... thats wat i think lol bc it has happend to me
2026-05-30 07:30:51
0
TinyRuby :
I had the same thing happened when I use my acrylic markers :(
2026-05-29 14:39:46
0
To see more videos from user @pokepalettebinders, please go to the Tikwm
homepage.
