1. Home
  2. Detail

@sarahgibbons_:

SARAH GIBBONS ❤️
SARAH GIBBONS ❤️
Open In TikTok:
Region: US
Friday 13 November 2026 02:28:56 GMT
2941
10
2
0

Music

Download

No Watermark .mp4 (3.53MB) No Watermark(HD) .mp4 (4.26MB) Watermark .mp4 (3.2MB) Music .mp3

Comments

cheerpals_colla
CheerPals | Colla :
Comfy
2026-11-13 08:16:05
0
macy.malone0
Macy Malone :
cute
2026-11-13 02:44:54
0
To see more videos from user @sarahgibbons_, please go to the Tikwm homepage.

Other Videos

#اکتیڤبن❤️akre_hawler_dhuk_slemani_soran #لايك__explore___
#اکتیڤبن❤️akre_hawler_dhuk_slemani_soran #لايك__explore___
🥹☕️🎄 Here’s how we made our hot cocoa stand! Supplies: • 4 wooden crates • Heavy-duty zip ties • Two 1x2 boards for the side supports • One 1x8 board for the sign • Two M6 × 1.0 × 50 mm bolts • Two M6 × 1.0 nuts + four M6 flat washers • Drill + ¼-inch drill bit • Paint, paintbrush, and decorations Instructions: • Paint the crates and boards, then let dry. • Stack two crates on each side, openings facing the back. • Thread zip ties through the slats where the crates meet. Secure each stack together, then connect both stacks side by side. Tighten and trim the ties. • Position a 1x2 upright against each outer side. Zip tie each support to both the upper and lower crates at multiple points. • Hold the sign across the tops of the supports. Mark one attachment point on each side and drill a ¼-inch hole through the sign and each support. • Slide a washer onto each bolt, push through the holes, then add another washer and nut behind each support. Tighten until snug without crushing the wood. • Add all the bows, garland, and hot cocoa goodies! ❤️ *To help keep it sturdy, place it on level ground and secure weight inside the bottom crates. I used my James’ gym weights 😂 A case of water or stakes is another option!! Supplies are all in my LTK!! @The Home Depot @Michaels Stores #diychristmas #diychristmasdecor #christmastraditions #diychristmascrafts #christmasideas
🥹☕️🎄 Here’s how we made our hot cocoa stand! Supplies: • 4 wooden crates • Heavy-duty zip ties • Two 1x2 boards for the side supports • One 1x8 board for the sign • Two M6 × 1.0 × 50 mm bolts • Two M6 × 1.0 nuts + four M6 flat washers • Drill + ¼-inch drill bit • Paint, paintbrush, and decorations Instructions: • Paint the crates and boards, then let dry. • Stack two crates on each side, openings facing the back. • Thread zip ties through the slats where the crates meet. Secure each stack together, then connect both stacks side by side. Tighten and trim the ties. • Position a 1x2 upright against each outer side. Zip tie each support to both the upper and lower crates at multiple points. • Hold the sign across the tops of the supports. Mark one attachment point on each side and drill a ¼-inch hole through the sign and each support. • Slide a washer onto each bolt, push through the holes, then add another washer and nut behind each support. Tighten until snug without crushing the wood. • Add all the bows, garland, and hot cocoa goodies! ❤️ *To help keep it sturdy, place it on level ground and secure weight inside the bottom crates. I used my James’ gym weights 😂 A case of water or stakes is another option!! Supplies are all in my LTK!! @The Home Depot @Michaels Stores #diychristmas #diychristmasdecor #christmastraditions #diychristmascrafts #christmasideas


Steam подарки от Бати
Steam подарки от Бати


#resposteria #reposteria #dc #sad #ihate
#resposteria #reposteria #dc #sad #ihate

About

Legal